Equipment maintenance
Equipment maintenance
Update time:2017-05-15 16:36:46Clicks:1948
1. Equipment shall be operated, maintained and maintained by full-time personnel
2. The residue in the cylinder and the screw rod shall be removed immediately after each production
3, the machine is generally not allowed to operate under no-load, so as to avoid the screw scraping machine cylinder or screw and screw between the bite, resulting in loss
4, remove and reinstall the screw before the application of compressed air blowing machine cylinder scrap, with a soft brush rod cleaning barrel, remove dirt particles and the scrap is larger, then the barrel clean, timely check the inner wall of the cylinder, that tiny damage should be polished to remove
5, vacuum cleaner in use after a certain time, we must remove the door cover, remove the debris in the cylinder, to ensure the normal work. When assembling and disassembling, the sealing of the cylinder can be ensured
6, the heating ring should be as evenly as possible on the machine cylinder, so as not to burn the heating ring
7, thermocouple, thermocouple hole and thermocouple location should be kept clean, so as to avoid temperature error
8, regular maintenance, timely discovery and correction of small faults, thereby preventing accidents arising from, oil change in the first cycle of normal work 500 hours oil change, after each operation 2000 hours oil change. The reduction gear box is added to the oil mark with HL57-22 gear oil, and the distribution box is added to the oil mark with H57-22 gear oil
9, in order to make the machine work normally, every year must regularly check all bearings, found that wear and tear in time replacement, disassembly and replacement gear should replace the new oil seal, to prevent oil leakage
10, main motor: regular maintenance of the main motor, change carbon brush and clean air filter
2. The residue in the cylinder and the screw rod shall be removed immediately after each production
3, the machine is generally not allowed to operate under no-load, so as to avoid the screw scraping machine cylinder or screw and screw between the bite, resulting in loss
4, remove and reinstall the screw before the application of compressed air blowing machine cylinder scrap, with a soft brush rod cleaning barrel, remove dirt particles and the scrap is larger, then the barrel clean, timely check the inner wall of the cylinder, that tiny damage should be polished to remove
5, vacuum cleaner in use after a certain time, we must remove the door cover, remove the debris in the cylinder, to ensure the normal work. When assembling and disassembling, the sealing of the cylinder can be ensured
6, the heating ring should be as evenly as possible on the machine cylinder, so as not to burn the heating ring
7, thermocouple, thermocouple hole and thermocouple location should be kept clean, so as to avoid temperature error
8, regular maintenance, timely discovery and correction of small faults, thereby preventing accidents arising from, oil change in the first cycle of normal work 500 hours oil change, after each operation 2000 hours oil change. The reduction gear box is added to the oil mark with HL57-22 gear oil, and the distribution box is added to the oil mark with H57-22 gear oil
9, in order to make the machine work normally, every year must regularly check all bearings, found that wear and tear in time replacement, disassembly and replacement gear should replace the new oil seal, to prevent oil leakage
10, main motor: regular maintenance of the main motor, change carbon brush and clean air filter
